No Minimum Orders. Why?

We do not have a minimum order amount for items that are sitting on our shelves. We have always supported the Research and Development efforts of the companies and industries we support. And while we will supply, and appreciate, the large volume production orders, we also want to be a resource for your R&D. We know it is difficult to find small quantities of the items we supply. So we make them available in quantities that make it easy for you to test with and conduct your research and develop a product.

There are times, however, when a minimum iwll apply becuase an item is not sitting on our shelf. Most of the time this will be with a shrink tubing product. Mostly FEP, but some times we do not have certian sizes of PTFE. So please call us ahead of time if you are looking for one of these items and let us try and work it out if you only need one four foot length. In general, we strive to keep material available, and give researchers and developers a place to get what they need, in just the right quantity as soon a possible. Hey. That is why we are The R&D Hardware Store!

Teflon Heat Shrink Tubing Used in Electrical and Medical Components

Teflon heat shrink tubing, also known as PTFE tubing, can stand up to a lot. It is available in both a 2:1 and a 4:1 shrink ratio and can stand up to much higher temperatures than FEP tubing. In fact, the minimum shrink temperature is around 650 degrees Fahrenheit. For this reason, it is generally used in extreme thermal, chemical, or electrical environments.

Component Supply Company Has the Teflon Heat Shrink Tubing You Are Looking For

Teflon heat shrink tubing commonly comes in lengths of four feet, but here at Component Supply Company, we are happy to custom cut pieces to match your specific needs. All you need to do is send us an email or give us a call at 863-738-0084, and we’ll be glad to answer any questions you may have and make sure you get exactly the right product for the project you’re working on.

Stainless Steel Hypodermic Tubing Comes in a Range of Wall Thicknesses

Whether you need stainless steel hypodermic tubing with a regular wall or an extra thin wall, Component Supply Company has what you are looking for. For that matter, we also supply a wide variety of gauge sizes, and we can supply the quantity you need, be it large or small. It that all sounds too good to be true, it’s because you’re not used to working with our company. We go out of our way to make things easier on you, the customer.

Stainless Steel Hypodermic Tubing Is Only One of Our Tubing Choices

Stainless steel hypodermic tubing is versatile and has a great many uses, but you should also know that we carry other types of tubing as well. For instance, we also carry heat shrink tubing, silicone tubing, and polyurethane tubing. That’s because we want to be your one-stop shop for small components that many companies simply don’t carry. We look forward to hearing from you!

Our Blunt Needles Come in Lab Kits for Your Convenience

Here at Component Supply Company, we’ve done our best to make ordering blunt needles easier for you. Instead of buying them individually, you can now select one of our lab kits that carries stainless steel needles with polypropylene hubs in a variety of gauge sizes. We offer three pre-packaged lab kits, and we also give you the opportunity to customize your own needle assortment.

Find the Blunt Needles You Need at Component Supply Company

When it comes to blunt needles, we offer many different gauge sizes. Custom lengths are also available on some of our models. As mentioned above, you can buy your needles in a lab kit, or you can also buy them in packs of 25, 50, or 500. If you have any trouble selecting the model you need, please email us or call us at 1-863-738-0084. Our experienced customer service staff will help you select the best option.

Let Component Supply Company Help You Find Thin Wall Stainless Tubing

If you’re looking for thin wall stainless tubing, the product that will most closely meet your needs is thin wall stainless steel hypodermic tubing. Component Supply Company realizes that this is a popular product. We can sell small quantities or large quantities, depending on what you need the product for. The standard lengths are 30 and 60 inches.

Thin Wall Stainless Tubing to Meet Your Needs

Here at Component Supply Company, we are happy to cut, bend, bevel, clean and deburr your thin wall stainless tubing so that it can be used to make custom blunt needles. For more information on our different types of hypodermic tubing, please visit our web site, send us an email or call us at 1-863-783-0084. We will answer any questions you may have and help you decide exactly which of our products is right for you.

General Properties of Woven Nylon Mesh

Woven nylon mesh is commonly used as a filtration device. Here at Component Supply Company, nylon is one of our most requested and widely stocked materials. There are a few cases, however, when nylon might not be your best choice. For instance, it does not have good resistance when it comes to standing up to light and weather, and the resistance grows poorer with prolonged exposure. This means you may have to replace your nylon mesh frequently. Nylon mesh also has a higher sensitivity to acids, especially at higher temperatures.

Alternatives to Woven Nylon Mesh

If you need a product that can withstand light and weather, you’re probably better off looking at a polyester mesh rather than a woven nylon mesh. Also, if your filter will be regularly exposed to harsh chemicals, consider a polypropylene mesh which has excellent acid resistance. If you’re not sure which filter would work the best for your specific needs, send us an email, and we’ll help you figure it out and get the right product on its way to you.

You Can Count on Our Straightened Wire

If you need straightened wire, the best place to get it is from the Component Supply Company. We offer material certifications to back up every order. When you call us, we can help you determine exactly the amount of wire you need, and even give you advice about how to store it safely. Don’t put off finishing your project any longer. Get your straightened wire from us and move forward today.

Straightened Wire: 304V Stainless Steel Wire

We create our straightened wire from 304V Stainless Steel Wire. It is spring-tempered and carefully drawn and straightened. You will find that it has a bright, attractive finish so that it always looks just like new. The standard lengths of wire we offer are 36-inch and 72-inch, but we will customize orders if you request that we do so. When you order from Component Supply Company, you will always have the peace of mind of knowing that you’re selecting the best.

Thin Wall Stainless Steel Tubing Cut to Order

Whether you need large quantities or small quantities of thin wall stainless steel tubing, Component Supply Company is ready to fill your order and to provide material certifications for the products you have ordered. Our standard lengths are 30 and 60 inches and we are willing to customize based on your unique needs.

Call Us for Thin Wall Stainless Steel Tubing

Our thin wall stainless steel hypodermic tubing comes in a wide variety of gage sizes. We can cut your order to a specified length. We can also bend, bevel, clear, and deburr the tubing and use it to create blunt needles. We can even place straightened stainless steel wire inside the tubing to allow you to make guide wire assemblies. If you’re looking for innovation in tubing and specialty products, visit us online or call us at 863-738-0084. We’ll listen to what you need and find a solution that works for you.

Order Stainless Steel Machine Screws from a Company You Can Feel Good About

Whether you’re ordering large pieces of equipment or something as small as stainless steel machine screws, you want to feel good about the company you’re ordering from. You want to trust them. Component Supply Company has been in business since 2009, but our experience goes back many more years that that. We conduct our business with a strong focus on personal integrity, and we consider what we do more of a ministry than nine-to-five job.

Details about Our Stainless Steel Machine Screws

We have several types and sizes of stainless steel machine screws to meet your mechanical needs. Examples include steel-slotted fillister head machine screws, miniature stainless steel slotted flat head machine screws, and miniature stainless steel Phillips pan head machine screws. And if you don’t find what you’re looking for online, give us a call at 863-738-0084. We can help you find exactly what you need to make your project a success.

Blunt Needle Lab Kits Make Your Job Easier

If you frequently use different sizes of the blunt needles for different job functions, you might be interested in ordering one of Component Supply Company’s blunt needle lab kits. We offer three standardized kits with various sizes of gauge and length. As you run low, ordering replacement parts is easy and inexpensive.

Customize Your Own Blunt Needle Assortment

If the blunt needle kits we provide just don’t work for you, we’d be glad to help you create your own customized kit. You can choose up to nine different dispensing tips. Then give us a call or send us an email, and we will create and label the divider box you have requested. Here at Component Supply Company, we understand that one size really doesn’t fit all. We’re ready to help you find or create what you need so that you can get your project underway.